Laptop Hard Drives — 2.5" Notebook Storage

Model-matched replacement drives for notebooks Dell, HP, Toshiba and Apple no longer support

About Laptop Hard Drives

A laptop hard drive is one of the few desktop-class parts where the exact notebook model genuinely matters — connector position, drive height (7mm vs 9.5mm), and interface generation all vary by generation and chassis. We stock 2.5-inch notebook drives across IDE/ATA-100 and SATA 1.5Gb/s–6Gb/s, sourced heavily from Dell Latitude, HP Pavilion/Compaq, Toshiba Satellite, and Apple MacBook systems, alongside standalone mechanisms from Toshiba, Fujitsu, and Samsung.

What's in Stock

  • IDE / ATA-100 2.5" drives — for pre-SATA notebooks (common through the mid-2000s), 4200 RPM, capacities from 6GB–160GB
  • SATA 1.5Gb/s & 3Gb/s notebook drives — the generation used in most 2007–2015 laptops, 5400 RPM
  • Apple MacBook drives — OS X-formatted SATA mechanisms pulled from MacBook/MacBook Pro units
  • Model-specific pulls — many listings reference the exact laptop they were pulled from (e.g. Latitude D610, Pavilion ZV5000) because drive height and caddy fit are chassis-dependent

Drive height (7mm vs 9.5mm) determines whether a replacement physically closes inside the chassis — a 9.5mm drive will not fit where the original was 7mm. Send us your laptop's model number and we will confirm interface, height, and capacity before you order.

Featured Laptop Hard Drives Products

Browse all 96,373 Laptop Hard Drives SKUs.

Frequently Asked Questions

How do I know if my laptop needs a 7mm or 9.5mm hard drive?

It depends on the notebook chassis design, not the drive brand. Thinner ultrabook-era laptops typically use 7mm drives; older and thicker notebooks use 9.5mm. Installing the wrong height either leaves the drive loose (7mm in a 9.5mm bay) or prevents the case from closing (9.5mm in a 7mm bay). Check your laptop's service manual or send us the model number and we will confirm.

Can I use a desktop 3.5-inch drive in a laptop?

No — laptop drives use the smaller 2.5-inch form factor to fit the notebook's drive bay, and desktop 3.5-inch drives are physically too large regardless of interface. Always match 2.5-inch to a laptop bay.

Will an Apple MacBook drive work in a Windows laptop?

The drive mechanism and SATA interface are standard, but drives pulled from a MacBook are typically HFS+/OS X formatted. They can be reformatted for Windows use, but if you need the original macOS data or a drop-in Apple replacement, order the Mac-specific listing rather than a generic SATA drive.

Related Pages

Part of

HP ProLiant Servers Hub

View all 224 pages →

HPE ProLiant DL, ML and BL Gen8 through Gen11 servers + every compatible part.