HPE ProLiant Gen11 Parts — DL380/DL360 Components
Complete parts guide for HPE ProLiant Gen11 servers — DDR5 memory, Xeon 4th/5th Gen CPUs, Smart Array Gen11, OCP3 NICs, hot-swap PSUs, iLO 6, and drive caddies
HPE ProLiant Gen11: The Current-Generation Standard
HPE ProLiant Gen11 servers launched in 2023 as the flagship of HPE's rack server lineup. Built on Intel Xeon 4th Gen Sapphire Rapids and now also supporting 5th Gen Emerald Rapids (via firmware update), Gen11 brings DDR5 memory, PCIe 5.0, OCP 3.0 networking, and HPE's iLO 6 management firmware.
The two most popular Gen11 models — DL380 Gen11 (2U) and DL360 Gen11 (1U) — account for the majority of enterprise rack server deployments worldwide. This guide covers every serviceable component with HPE part numbers, pricing, and compatibility notes.
Gen11 vs Gen10/Gen10+ — What Changed?
| Feature | Gen10 / Gen10+ | Gen11 |
|---|---|---|
| CPU Socket | LGA3647 (Xeon Gen1-Gen3) | LGA4677 (Xeon Gen4-Gen5) |
| Memory Type | DDR4 RDIMM/LRDIMM | DDR5 RDIMM |
| Max Memory | 3TB (Gen10+) | 8TB (DL380 Gen11) |
| PCIe Generation | PCIe 4.0 | PCIe 5.0 |
| NIC Standard | OCP 2.0 (Mezz) | OCP 3.0 |
| Management | iLO 5 | iLO 6 |
| RAID | Smart Array P408i | Smart Array Gen11 (SR416i-a, SR416i-p, MR416i-p) |
| Storage Backplane | SAS/SATA 12Gb | SAS/SATA/NVMe U.3 |
Key Takeaway: Gen11 is NOT backward compatible with Gen10 CPUs, memory, or RAID controllers. If upgrading from Gen10 to Gen11, budget for new DIMMs, CPUs, and potentially RAID cards.
HPE ProLiant DL380 Gen11 — Specifications
| Spec | DL380 Gen11 |
|---|---|
| Form Factor | 2U Rack |
| CPU | 1–2× Intel Xeon 4th/5th Gen Scalable (LGA4677) |
| Max Cores | 128 cores / 256 threads (2× Xeon Platinum 8592+) |
| DIMM Slots | 24 (12 per CPU) |
| Max RAM | 8TB (24× DDR5 RDIMM) |
| Drive Bays | Up to 24× 2.5" SFF or 12× 3.5" LFF hot-swap |
| PCIe Slots | 8× PCIe 5.0 (via 3 riser cards) |
| OCP Slot | 1× OCP 3.0 (25GbE/100GbE) |
| PSU | 1–2× Flex Slot hot-swap (800W/1600W) |
| iLO | iLO 6 (standard) |
| Management | HPE Agentless Management Service 2 (AMS2) |
HPE ProLiant DL360 Gen11 — Specifications
| Spec | DL360 Gen11 |
|---|---|
| Form Factor | 1U Rack |
| CPU | 1–2× Intel Xeon 4th/5th Gen Scalable (LGA4677) |
| DIMM Slots | 16 (8 per CPU) |
| Max RAM | 4TB (16× DDR5 RDIMM) |
| Drive Bays | Up to 10× 2.5" SFF or 4× 3.5" LFF hot-swap |
| PCIe Slots | 3× PCIe 5.0 |
| OCP Slot | 1× OCP 3.0 |
| PSU | 1–2× Flex Slot hot-swap (500W/800W/1600W) |
| iLO | iLO 6 (standard) |
Gen11 Memory — DDR5 RDIMM
Gen11 servers require DDR5 ECC RDIMM. DDR4 DIMMs from Gen10 will not fit — the DIMM key is physically different.
Supported Memory Types
| Type | Speed | Sizes | Use Case |
|---|---|---|---|
| DDR5 RDIMM 1R×8 | 4800 MT/s | 16GB | Entry density, low latency |
| DDR5 RDIMM 2R×8 | 4800 MT/s | 32GB / 64GB | Standard servers |
| DDR5 RDIMM 2R×4 | 4800 MT/s | 64GB | High density standard |
| DDR5 RDIMM 4R×4 | 4800 MT/s | 128GB | Maximum RDIMM capacity |
Compatible HPE Memory Part Numbers
| HPE Part # | Capacity | Type | Speed | Notes |
|---|---|---|---|---|
| P64335-B21 | 16GB | DDR5 RDIMM 1Rx8 | 4800 MT/s | Entry configs |
| P64336-B21 | 32GB | DDR5 RDIMM 2Rx8 | 4800 MT/s | Most common |
| P64337-B21 | 64GB | DDR5 RDIMM 2Rx4 | 4800 MT/s | High density |
| P64338-B21 | 128GB | DDR5 RDIMM 4Rx4 | 4800 MT/s | Max RDIMM |
| P65342-B21 | 32GB | DDR5 RDIMM 2Rx8 | 5600 MT/s | Gen5 Xeon optimized |
Pro Tip: DDR5 Gen11 memory runs at 4800 MT/s by default. With 5th Gen Xeon (Emerald Rapids) and 5600 MT/s DIMMs, you get an additional ~16% bandwidth gain. Check your CPU model before ordering faster DIMMs.
Population rules: Populate DIMMs starting from slot 1A, 2A in each processor's memory domain. Use matched pairs for best performance. Single-CPU configurations use processor 1 DIMM slots only.
Browse HPE Gen11 Server Memory
Gen11 Processors (CPUs)
Supported Intel Xeon 4th Gen Sapphire Rapids
| Model | Cores | Base GHz | TDP | Best For |
|---|---|---|---|---|
| Xeon Gold 5420+ | 28c | 2.0 | 205W | Entry dual-socket |
| Xeon Gold 6430 | 32c | 2.1 | 270W | Mid-range general purpose |
| Xeon Gold 6448Y | 32c | 2.1 | 225W | Efficiency optimized |
| Xeon Platinum 8460Y+ | 40c | 2.0 | 300W | High density compute |
| Xeon Platinum 8480+ | 60c | 2.0 | 350W | Maximum Gen4 cores |
Supported Intel Xeon 5th Gen Emerald Rapids (via FW update)
| Model | Cores | Base GHz | TDP | Best For |
|---|---|---|---|---|
| Xeon Gold 6558Q | 32c | 3.2 | 350W | High-frequency apps |
| Xeon Gold 6548Y+ | 32c | 2.5 | 235W | Power-efficient |
| Xeon Platinum 8568Y+ | 48c | 2.3 | 300W | Core-dense VMs |
| Xeon Platinum 8592+ | 64c | 1.9 | 350W | Maximum Gen5 cores |
Key Takeaway: Gen11 shipped with Gen4 Xeon support. A BIOS update (v1.10+, available in HPE SPP 2023.09+) adds Gen5 support. Verify BIOS version before installing Emerald Rapids CPUs.
RAID Controllers — Smart Array Gen11
Gen11 introduces a completely new RAID controller family. Gen10 Smart Array P408i/P816i controllers are NOT compatible with Gen11.
Gen11 RAID Controllers
| Model | Interface | Cache | Form Factor | Best For |
|---|---|---|---|---|
| SR416i-a | 12Gb SAS/SATA | 4GB | Embedded | Standard RAID (no NVMe) |
| SR416i-p | 12Gb SAS/SATA/NVMe | 4GB | PCIe card | Mixed SAS + NVMe |
| MR416i-a | 12Gb SAS/SATA | 4GB | Embedded | Broadcom-based RAID |
| MR416i-p | 12Gb SAS/SATA/NVMe | 4GB | PCIe card | Mixed SAS + NVMe PCIe |
| NS204i-u | NVMe | — | ODD Bay | Boot NVMe mirror |
Pro Tip: The NS204i-u uses the optical drive bay to host 2× M.2 NVMe SSDs in a RAID 1 mirror — perfect for OS boot without consuming a drive bay. Part number: P12965-B21.
HPE RAID Controller Part Numbers
| HPE Part # | Model | Description |
|---|---|---|
| P26278-B21 | SR416i-a | Embedded Smart Array 4GB flash-backed |
| P26279-B21 | SR416i-p | PCIe Smart Array 4GB flash-backed |
| P53562-B21 | MR416i-p | Broadcom MegaRAID PCIe |
| P12965-B21 | NS204i-u | Boot device NVMe 2× M.2 |
Browse Enterprise RAID Controllers
Power Supplies — Flex Slot Hot-Swap
Gen11 uses HPE's Flex Slot PSU standard — the same mechanical format as Gen10. However, higher-efficiency Titanium and Platinum models are recommended for Gen11's higher TDP CPUs.
Compatible PSU Models
| HPE Part # | Wattage | Efficiency | Best For |
|---|---|---|---|
| P38995-B21 | 500W | 80+ Platinum | Low-power 1-CPU DL360 Gen11 |
| P38996-B21 | 800W | 80+ Platinum | Standard 1-2 CPU DL380/DL360 |
| P38997-B21 | 1600W | 80+ Platinum | High-core, GPU-equipped DL380 |
| P39376-B21 | 1600W | 80+ Titanium | Maximum efficiency, lower OpEx |
| P39377-B21 | 2650W | 80+ Titanium | 8-GPU AI/ML configurations |
Pro Tip: Always install two PSUs for redundancy (1+1). Gen11 with dual Platinum 8592+ CPUs and 3× GPUs should use 2× 1600W PSUs minimum. The 2650W Titanium PSU is for GPU-dense configurations with 4+ accelerators.
OCP 3.0 Network Adapters
Gen11 replaces the OCP 2.0 Mezz slot with OCP 3.0. Gen10 OCP 2.0 cards are NOT compatible.
Common Gen11 OCP 3.0 NICs
| HPE Part # | Speed | Ports | Chipset | Notes |
|---|---|---|---|---|
| P28787-B21 | 10GbE | 2-port | Broadcom BCM57416 | SFP+ embedded NIC |
| P21109-B21 | 25GbE | 2-port | Broadcom BCM57414 | Standard Gen11 choice |
| P08449-B21 | 100GbE | 2-port | Mellanox ConnectX-6 | High-bandwidth AI/NVMe-oF |
| P42104-B21 | 25GbE | 4-port | Intel E810 | 4-port for software-defined networking |
Pro Tip: The OCP slot sits on the motherboard with direct PCIe 5.0 x16 bandwidth — no add-in card slot required. For most enterprise workloads, the 25GbE 2-port P21109-B21 is the right starting point.
Browse HP Server Network Cards
Drive Caddies and Trays
Gen11 uses a new SFF (2.5") caddy design compared to Gen10. The latch mechanism changed slightly with Gen11's updated backplane.
Compatible Drive Caddies
| HPE Part # | Size | Type | Compatible Servers |
|---|---|---|---|
| P14494-B21 | 2.5" SFF | SAS/SATA/NVMe | DL360/DL380 Gen11 |
| P14496-B21 | 3.5" LFF | SAS/SATA | DL380 Gen11 LFF config |
| P14494-B21 | 2.5" SFF | NVMe U.3 | Gen11 NVMe config |
Pro Tip: Gen11 supports HPE's Universal Media Bay — a single backplane can accept SFF SAS/SATA drives AND SFF U.3 NVMe drives. The caddy is the same (P14494-B21); the backplane handles the protocol negotiation via U.3 tri-mode.
Rail Kits
Gen11 uses HPE's Universal Ball Bearing Rail Kit, compatible with 19" EIA/IEC standard racks.
| HPE Part # | Type | Rack Depth | Compatible |
|---|---|---|---|
| P35543-B21 | Easy Install Rail Kit | 600–900mm | DL380/DL360 Gen11 |
| P26118-B21 | Ball Bearing Rail | 700–900mm | DL380 Gen11 (heavier 2U) |
iLO 6 — Remote Management
iLO 6 is HPE's 6th generation integrated Lights Out management controller, standard on all Gen11 servers.
iLO 6 Key Features vs iLO 5
| Feature | iLO 5 (Gen10) | iLO 6 (Gen11) |
|---|---|---|
| Remote Console | HTML5 KVM | HTML5 KVM (improved) |
| Security | Silicon Root of Trust | Enhanced Silicon Root of Trust |
| Agentless Mgmt | AMS | AMS 2 |
| REST API | Redfish 1.x | Redfish 2.x (full parity) |
| HPE Compute Ops Mgmt | Limited | Full integration |
| One-Click Firmware Update | SPP only | SPP + Compute Ops Mgmt |
iLO 6 Standard is built in to the motherboard at no extra cost. iLO 6 Advanced (full KVM, virtual media, power monitoring) is licensed — HPE part number P40853-B21 for lifetime activation.
Recommended Gen11 Upgrade Configurations
Configuration 1: Virtualization Host (VMware/Proxmox)
- Server: DL380 Gen11 (2U)
- CPUs: 2× Xeon Gold 6448Y (64 cores, 460W total)
- RAM: 16× 32GB DDR5 RDIMM = 512GB (P64336-B21)
- Storage: 4× 1.92TB NVMe SSD (U.3) + 2× 16GB M.2 OS mirror (NS204i-u)
- RAID: SR416i-p (PCIe, supports NVMe passthrough)
- NIC: OCP 25GbE 2-port (P21109-B21) + PCIe 25GbE 2-port
- PSU: 2× 800W Platinum (P38996-B21)
- Estimated Cost: $12,000–$16,000
Configuration 2: AI Inference Node
- Server: DL380 Gen11 (2U)
- CPUs: 2× Xeon Platinum 8480+ (120 cores, 700W)
- RAM: 24× 64GB DDR5 RDIMM = 1.5TB (P64337-B21)
- GPUs: 3× NVIDIA A100 80GB PCIe
- Storage: 2× 3.84TB NVMe SSD + NS204i-u boot mirror
- NIC: OCP 100GbE 2-port (P08449-B21)
- PSU: 2× 2650W Titanium (P39377-B21)
- Estimated Cost: $55,000–$75,000
Configuration 3: Storage Server (TrueNAS/Ceph)
- Server: DL380 Gen11 LFF (2U, 12-bay)
- CPU: 1× Xeon Silver 4416+ (20 cores, 165W)
- RAM: 8× 32GB DDR5 RDIMM = 256GB
- Drives: 12× 20TB SATA NL-SAS 3.5" LFF
- RAID: SR416i-a (or HBA mode for ZFS passthrough)
- NIC: OCP 10GbE 2-port (P28787-B21)
- PSU: 2× 800W Platinum
- Estimated Cost: $8,000–$14,000
Where to Buy HPE ProLiant Gen11 Parts
Pro Disk Network stocks a full range of Gen11-compatible components including DDR5 RDIMM, OCP 3.0 NICs, Smart Array Gen11 controllers, PSUs, and drive caddies at 40–60% below HPE list price.
All parts include part number verification and 90-day warranty. Email sales@prodisknetwork.com with your server serial number for guaranteed compatibility confirmation before ordering.
Shop HPE ProLiant Parts | Browse Gen11 Memory | Get a Bulk Quote